The earliest ceramics were pottery objects made from mixed,which was pressed and fired with other materials. In the 20th century,new ceramics were developed,by combining the old process with new materials,resulting in advanced technical ceramics. There are an enormous range of accessories for various purposes.That are manufactured starting from different raw materials,wich are in ceramic, as well as traditional and that produced the base of natural material like clay that crushed,shaped and baked at high temperature. There are many types of ceramic products differenialed by their hardness,non-conduction corrosion resistance,thermal resistance,or if they are alumina ceramic or zirconia ceramic, also we have silicon nitride and silicon carbide and others. The advanced technical ceramics is part of our daily lives,from the miniaturization of the components of the computer industry, Many important electronic devices used by people today would be impossible without the use of ceramics. Has a fundamnental role in our life,without it many of the items that count as garanteed in our daily use,simply would not be possible and other technologies have been stagnating in a level much lower than they are today. The technical ceramics,wich provide resistance to abrasion and friction wich support the　anticorrosion,protects and preservees,totally different from conventional ceramics.The TMP ceramics applied to our products,are developed in the highest technology and quality for the economy and low cost in maintenance.That the technique,the process of making molds,may be for pressure isostatic,pressure uniaxial,extrusion,casting with slips,in injection molding,produced for various applications,and directed the industry,petrochemical,chemical and stell. ■ Ceramic though an Electron Microscope   (CRUSHED IN 5.5mm)　　(CRUSHED IN 3.5mm) Depending on the location and layout,the TMP produces products using the both types of crushed ceramics produced in standard sizes and shapes of varied applications. ■　QUALITY The level of quality can be assessed by the amount of additives,adding other powders to aluminium oxide(AL2O3) or alumina,many people think that all ceramics are the same,at the quality depends on the degree of power,quantiy depends on the degree of powder,quantity of additives,pressure,firing temperature and others parameters.Evaluet it in terms of points of 20-100,it is risk to judge the ceramic just by looking at it is form.the pressure ceramic,is too hard to cut even with diamond cutter, the abrasion degree has 5-10 time resistance.